Product Reviews

[arutha]

One other aspect I have just noticed is I want to comment on your review of the micro drill bits. I too have have found them to be good quality, I do however always check the size of the drill that comes out of the box as they tend to be almost their indicated size and not always exactly. The other thing is to check the tips, some of them are not formed or ground very nicely and just won’t cut, a few rubs on a fine stone and held in a small pin chuck will sort this out.
Now this information is two pages away from your original review
Great idea but we need to organise it better.
Paul.

[david pierce]

Mike,
Put a squirt of Liquid Wrench on the thread give it a chance to loosen the joint. You can then screw another nut over the other nut and lock them together or use a pair of vice grips or a small pipe wrench to unscrew the shaft.

You can see some pictures of watchmaker lathes on this post.
david

[Author]

Posts