Home Forums General Discussion Forum Hour Wheel Spring (or Springs?)…

  • This topic is empty.
Viewing 15 posts - 1 through 15 (of 19 total)
  • Author
    Posts
  • #49314
    maitai11
    Participant

      Hi Guys,

      I have two springs – a large and a small – but I’m not sure if the hour wheel got two versus the minute wheel getting one and the hour wheel getting one…What say you?

      Chris? Here’s a pic :)

      Best,

      Tim

      #60561
      chris mabbott
      Participant

        Only the hour wheel gets one… maybe you had two on there?

        #60361
        chris mabbott
        Participant

          Only the hour wheel gets one… maybe you had two on there?

          #60461
          chris mabbott
          Participant

            Only the hour wheel gets one… maybe you had two on there?

            #60462
            maitai11
            Participant

              Very good, Chris, thank you. That was my sense – it came off unbeknownst to me, so I wondered about the double-up on the hour wheel. That is what I will do. No spring for minute wheel.

              Thanks Chris!

              Best,

              Tim :)

              #60562
              maitai11
              Participant

                Very good, Chris, thank you. That was my sense – it came off unbeknownst to me, so I wondered about the double-up on the hour wheel. That is what I will do. No spring for minute wheel.

                Thanks Chris!

                Best,

                Tim :)

                #60362
                maitai11
                Participant

                  Very good, Chris, thank you. That was my sense – it came off unbeknownst to me, so I wondered about the double-up on the hour wheel. That is what I will do. No spring for minute wheel.

                  Thanks Chris!

                  Best,

                  Tim :)

                  #60463
                  randy
                  Participant

                    Those pesky dial washers stick together right from the vial sometimes Tim….

                    R

                    #60563
                    randy
                    Participant

                      Those pesky dial washers stick together right from the vial sometimes Tim….

                      R

                      #60363
                      randy
                      Participant

                        Those pesky dial washers stick together right from the vial sometimes Tim….

                        R

                        #60564
                        maitai11
                        Participant

                          Oh, ok Randy, I never thought of that…in that case, I should maybe replace with just one ? HEY! if I do that, I’ll have a spring in stock!!!!

                          :)

                          #60464
                          maitai11
                          Participant

                            Oh, ok Randy, I never thought of that…in that case, I should maybe replace with just one ? HEY! if I do that, I’ll have a spring in stock!!!!

                            :)

                            #60364
                            maitai11
                            Participant

                              Oh, ok Randy, I never thought of that…in that case, I should maybe replace with just one ? HEY! if I do that, I’ll have a spring in stock!!!!

                              :)

                              #60565
                              randy
                              Participant

                                Could be that’s what happened to the previous watchmaker,..or, he / she replaced the dial, and because of the difference in the way the dial fitted up the hour pipe kept creeping up and not meshing,..so two were used.
                                No harm in having two actually,..just not normally needed.

                                Take care Tim

                                Randy

                                #60465
                                randy
                                Participant

                                  Could be that’s what happened to the previous watchmaker,..or, he / she replaced the dial, and because of the difference in the way the dial fitted up the hour pipe kept creeping up and not meshing,..so two were used.
                                  No harm in having two actually,..just not normally needed.

                                  Take care Tim

                                  Randy

                                Viewing 15 posts - 1 through 15 (of 19 total)
                                • You must be logged in to reply to this topic.