Welcome to the Members Forum!

Home Forums General Discussion Forum Welcome to the Members Forum!

  • This topic is empty.
Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #47951
    Bob Tascione
    Moderator
    • Topics Started: 38
    • Total Posts: 1553

    Good to see you here!

    Since you’re reading this then I guess I FINALLY figured out how to run this thing…barely.
    If some weird things happen during your visit please hang in there with me until I get through some of the technical stuff that comes with managing this forum.
    If you haven’t already read the Forum Rules above and the forum description please take a minute to go though them.
    I’ve just launched this forum today Saturday, May 1.

    Please feel free to start a thread by clicking the New Topic button or just jump right in to an existing thread.

    Thanks and again Welcome!

    Bob

    #50250
    justrightgeorge
    Participant
    • Topics Started: 2
    • Total Posts: 9

    Now I can’t find the new topic button, but I’m sure it will turn up.

    What does one do with a clock that will fun just fine on a test stand but stops whenever it’s put in a case? Have to spend a lot of time watching “tempus fugit.”

    #50251
    wingman
    Participant
    • Topics Started: 34
    • Total Posts: 91

    Hello Bob/Et Al.

    I’m new to both clock repair and collecting. The videos have been great and I probably couldn’t have gotten as far with out them. I haven’t enjoyed a hobby more. My wife is enjoying the collecting and she assists with many of the repairs. She did a nice restoration of our old elopement cuckoo clock. We joined NAWCC and can’t wait for the next Pacific NW regional meeting.

    Cheers
    Steve Ray
    Wingman
    Victoria, BC
    Canada

    #50252
    Bob Tascione
    Moderator
    • Topics Started: 38
    • Total Posts: 1553

    Good to see you up here Steve!

    Bob

    #50253
    oldtimers
    Participant
    • Topics Started: 1
    • Total Posts: 18

    Hi Bob,
    I’ve been doing both clocks and watches for a few years now but must say I’ve picked up a lot of good tips from your online courses. The animations in the clock section are amazing. Hope you’ll continue doing them. I do AS3 flash programming and know that what you’ve done with the course in the way of interactivity isn’t easy and takes a lot of time. Do you do your own programming?
    Thanks for the courses and the forum!

    John

    #50254
    watchthis55
    Participant
    • Topics Started: 2
    • Total Posts: 5

    hello clock folk, new to this forum and learning for yrs the greatist hobby ever,am i aloud to ask about obtaining watch and clock parts from the forum

    #50255
    Bob Tascione
    Moderator
    • Topics Started: 38
    • Total Posts: 1553

    Good to have you on board OldTimers and Watchthis55! Thanks for joining.

    OldTimers: Happy to hear you like the animations and interactivity…yes I do all of the AS3 programming myself and am working on some interactive animations right now. Tough but powerful stuff AS3. This is something I can do from the boat wherever I am. I enjoy it alot but sometimes…well you know.

    Watchthis55: By all means ask for parts anytime up here. Also if you find a good place for used parts etc. please post that up here too.

    Thanks again for joining,
    Bob

    #50256
    oldtimers
    Participant
    • Topics Started: 1
    • Total Posts: 18

    Thanks Bob
    It’s good to be here. I do AS3 programming for a living so I can appreciate the work you’ve done setting everything up online. Your players are perfect for jumping (navigating) to any topic. That took some doing. Nice work, nice course.

    John

Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.
Bob TascioneWelcome to the Members Forum!