Ultrasonic cleaner.

Home Forums General Discussion Forum Ultrasonic cleaner.

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #50232
    john baker
    Participant
    • Topics Started: 8
    • Total Posts: 15

    What is the most time I should leave brass plates and wheels in cleaner when using “soup”?

    #65289
    Anonymous
    • Topics Started: 14
    • Total Posts: 129

    Hello John,
    I usually run it around 10 minutes or so. I often
    do a bit of hand cleaning first with a brush and
    Coleman lantern fluid and always fully disassemble
    the movement. You can let it run longer if needed
    but have to be sure the movement isn’t lacquered because
    the U.S. will remove the lacquer! That occurs somewhere
    around 15 minutes in my machine. I use ammonia based cleaner.

    Best, Dan

    #65290
    john baker
    Participant
    • Topics Started: 8
    • Total Posts: 15

    Thanks for your advice Dan, appreciate it.

    Regards,

    John.

    #65291
    clock king
    Participant
    • Topics Started: 8
    • Total Posts: 17

    This might be a stupid question, but, how would one tell if it’s laqured?

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.
john bakerUltrasonic cleaner.