Rubbed-in Burnisher…

  • This topic is empty.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #48635
    tmac1956
    Participant
    • Topics Started: 171
    • Total Posts: 1259

    All:

    Not being able to find a burnisher for finishing off a rubbed-in jewel, I found one in “Master Watchmaking” by the now defunt Chicago School of Watchmaking. As Authra recommended in another post, you need the jewel opening and closing tools to do the work – or as David also posted, the work can be done in the lathe. However, based upon my efforts, you need a burnisher to finish the metal pulled in by the closing tool. So, here it is…

    I hope you can use this in your efforts as well!
    tmac

    #53692
    chris mabbott
    Participant
    • Topics Started: 119
    • Total Posts: 1525

    I’ve been using these inexpensive ones from Cousins, they work very well..

    https://www.cousinsuk.com/catalog/6/0/1674/4932.aspx?code=b31878

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.
tmac1956Rubbed-in Burnisher…