Ringin’ the Bell II…

Home Forums General Discussion Forum Ringin’ the Bell II…

  • This topic is empty.
Viewing 1 post (of 1 total)
  • Author
  • #48682
    • Topics Started: 171
    • Total Posts: 1259


    I got the new balance staff for the Elgin 18s discussed in the older post. I put a micrometer on it and here are the results.

    (Recap) Calculated length to the underside of the top and bottom cap jewels = 0.247”

    (Recap) Old pivot-to-pivot length=0.2315”

    New balance staff length = 0.2400″

    Thus, there is a 0.007″ difference between the calculated length and the new balance staff length. (I have a hard time believing that my calculations are that close – except by coincidence that is)

    I’ll re-post once I get the new one in – hopefully, this will actually prove to be be the cause of the problem.


Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.
tmac1956Ringin’ the Bell II…