Making multi tooth cutters – Part 5

  • This topic is empty.
Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #49667
    willofiam
    Moderator
    • Topics Started: 75
    • Total Posts: 1437

    Hey everyone, here is Part 5 (polishing & cutting the cutter teeth) from the series I am doing about making multi tooth cycloidal cutters. As you will notice in the video I am using my Atlas benchtop horizontal mill for cutting out the cutter blank teeth. I thought I would try this as I do not use this mill very much and I can leave it set up for this part of the process in making these cutters. The feeds and speeds I used were very slow, it was my experiment to try and avoid creating any burrs from the saw blade. Didn’t help much so I will be going back to higher rates for this (at least I cleaned up the shop while waiting for it to cut through each time 🙄 ).
    In the next video. Part 6, I will be cutting the actual pinion.
    Hope you find this interesting and informative, please feel free to make some comments here.
    Have a great day, William

    If you missed any of the other threads about making these cutters, here are the links
    Part – 4 viewtopic.php?f=7&t=1805
    Part – 3 viewtopic.php?f=7&t=1806
    Part – 2 viewtopic.php?f=7&t=1807
    Part – 1 viewtopic.php?f=7&t=1775

    Don’t forget to check out http://LearnTimeOnline.com

    BACK TO FORUM INDEX PAGE: http://clockrepairtips.com/forum/index.php

    [youtube:wnzbr3ff]GUiZyKoA6v4[/youtube:wnzbr3ff]

    BACK TO FORUM INDEX PAGE: http://clockrepairtips.com/forum/index.php

    #63245
    bernie weishapl
    Participant
    • Topics Started: 58
    • Total Posts: 1218

    Another great video William.

    #63246
    willofiam
    Moderator
    • Topics Started: 75
    • Total Posts: 1437

    Thank you Bernie glad you enjoyed it, Part 6 is coming soon. Have a great day, William

    #63247
    gerene
    Participant
    • Topics Started: 16
    • Total Posts: 377

    Nice work William, really enjoyed watching it.

    Jan

    #63248
    willofiam
    Moderator
    • Topics Started: 75
    • Total Posts: 1437

    Thank you Jan, I am glad you enjoyed it. Part 6 soon to come.
    William

    #63249
    its time
    Participant
    • Topics Started: 10
    • Total Posts: 30

    William
    I have been wondering how the gear or wheel cutters was going? It’s been a year, any progress? Enquiring minds gotta know?
    Best wishes
    Nelson

    #63250
    willofiam
    Moderator
    • Topics Started: 75
    • Total Posts: 1437

    Nelson, your right…busy busy busy here…I was hoping that you would have come over to help haul 12 yards of landscape rock this summer, I would have given you free lessons on how to accomplish that task :D . Anyway…soon I hope. Thanks for asking, William

    #63251
    tictock
    Participant
    • Topics Started: 3
    • Total Posts: 14

    William,
    What video editor program are you using.

    Henry Smith

    #63252
    willofiam
    Moderator
    • Topics Started: 75
    • Total Posts: 1437

    It is one on my computer called movie maker.

Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.
willofiamMaking multi tooth cutters – Part 5