Longines pocket watch…

Home Forums General Discussion Forum Longines pocket watch…

  • This topic is empty.
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #49509
    tmac1956
    Participant
    • Topics Started: 171
    • Total Posts: 1259

    All:

    I’m currently working on a Longines pocket watch and I need to replace the balance staff. Unfortunately, I can’t find the balance staff part number. Could anyone look up the staff part number based upon the movement serial number? The serial number is 5288880. There appears to be plenty of these available on eBay, but I just need the part number.

    Thanks,
    Tom

    #62165
    randy
    Participant
    • Topics Started: 39
    • Total Posts: 594

    Tom
    I don’t know the part number but here’s a great place to reference a bunch of staffs by caliber/model. etc.
    http://www.balancestaffs.com/longines.php

    If you click on the “more info” link..it gives all the dimensions.

    Randy

    #62166
    tmac1956
    Participant
    • Topics Started: 171
    • Total Posts: 1259

    Randy:

    That’s a big help. I looked in my old catalog for Longines watches but everything is listed by linges and there are multiple staffs for the one that I have.

    Thanks again!
    Tom

    #62167
    randy
    Participant
    • Topics Started: 39
    • Total Posts: 594

    You’re welcome Tom.
    Hopefully you still have the old staff and can cross reference the dimensions.
    I just had to do this recently for my Ham PW that needed a new staff..and there were multiple sizes.

    Best,

    Randy

    #62168
    tmac1956
    Participant
    • Topics Started: 171
    • Total Posts: 1259

    Randy:

    It’s still in the watch but I’m pretty sure that both pivots are broken as the balance is wobbling in the vertical and horizontal. Still, I should be able to get the dimensions as you say.

    Thanks again!
    Tom

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.
tmac1956Longines pocket watch…