First clock movement apart

Home › Forums › General Discussion Forum › First clock movement apart

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 13, 2021 at 5:36 pm #50239
    clock king
    Participant

      Hello everyone,
      I took a part my first movement and am getting ready to clean, oil and, reassemble. I have two questions
      1) the picture below – That needs to be rebushed, correct?
      2) is the main spring supposed to look like this when unwound?

      March 17, 2021 at 12:31 pm #65310
      Anonymous

        Might need a bushing. Best to check the hole under magnification
        to see if it has worn oblong. If perfectly round then might be fine.
        Mainspring looks very good!
        Best, Phil

        March 17, 2021 at 6:36 pm #65311
        clock king
        Participant

          Thank you

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.