Home Forums General Discussion Forum Crystal replacement – Invicta Diver

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #48369
    randy
    Participant

      Have a client who smashed the “Flame” crystal on his Noma III subaqua diver.
      He’s not concerned at all with retaining the 500 meter dive rating on it, so I was thinking of replacing it w/ a sapphire crystal.
      Never removed one of these bezels though,..but from the little I can find, I’m seeing where folks say to gently pry it off like a Rolex bezel.

      Any suggestions ????

      Thanks

      Randy

      #52204
      Bob Tascione
      Moderator

        That’s a good question Randy.
        I’m not sure about that particular Invicta but my guess would be yes…it would be the same. I had an Invicta…trying to remember the model but it looked alot like the Submariner… and it popped off exactly like the Sub.
        Don’t hold me to it but got a ‘yes’ vote from me on that one. Maybe someone else up here is familiar with your Noma.

        Good luck and enjoy…also please let me know what you find out.
        Bob

        #52205
        randy
        Participant

          Thanks Bob.
          I’ll give it a “safe” try,..and I’ll let you know what happens ….
          BTW,..I won’t hold you responsible !

          Best,

          randy

        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.