Clock plate holders

Home › Forums › General Discussion Forum › Clock plate holders

  • This topic is empty.
Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • February 12, 2015 at 4:33 pm #49439
    khoward279
    Participant

      I made these the other day to hold clock plates and they work great. I used a small hardinge lathe and Bridgeport lots of fun.




      February 12, 2015 at 9:18 pm #61686
      david pierce
      Participant

        Kevin,
        How about posting some pictures of the Hardinge.
        david

        February 13, 2015 at 5:50 am #61687
        bernie weishapl
        Participant

          Looks good. Nice project.

          February 13, 2015 at 7:36 am #61688
          namonllor1953
          Participant

            Hi Kevin,
            Nice job on the plate stands. Have you made any other clock tools?
            Ren

            February 13, 2015 at 10:02 am #61689
            chris mabbott
            Participant

              Looks really good, and yes, lots of gratifying fun…priceless :)

              February 14, 2015 at 4:10 pm #61690
              khoward279
              Participant

                Thanks Everyone,
                Ren I posted some pictures of a mainspring winder I made in the shop pics page. I’m in the process of finishing it with a reversible click. I just finished a pivot polisher I made using a rc car motor and o rings for a drive belt. I ordered a toggle switch and a variable speed controller for it. Lastly I purchased a led light transformer that goes from 110v ac to 12v dc to power it. I think you guys will like it I get my inspiration from everyone on here. Pictures will follow this week.

                Thanks kevin

                February 14, 2015 at 4:50 pm #61691
                namonllor1953
                Participant

                  Ahhh, you’re that Kevin.
                  Great job on the winder. I popped one out in poplar. It works like a dream.
                  I’ll tell you, most of my horology making has been in making some of my tools. I really love tinkering and making tools I can use rather than buying them used or from some manufacturer.
                  Keep up the great work and post your photos, sure as all heck, I’ll appreciate it!! :D

                  February 14, 2015 at 7:10 pm #61692
                  stevefitzwater
                  Participant

                    I am interested in that RC Motor pivot polisher… I have about twenty of those critters gathering dust.

                  • Author
                    Posts
                  Viewing 8 posts - 1 through 8 (of 8 total)
                  • You must be logged in to reply to this topic.