Home › Forums › General Discussion Forum › Bergeon automatic oiler instructions
- This topic is empty.
-
AuthorPosts
-
June 25, 2012 at 11:09 pm #48304
Hello all, I picked up an old 1A oiler a while ago off Ebay but it didn’t come with any instructions.
Could anyone point me in the direction of some online, or perhaps email me a scan?Thanks in advance
Regards
PeterJune 26, 2012 at 12:46 am #51969Doe sthis make any sense to you?
“The oiler is filled by capillary action or by unscrewing the clear end after retracting the internal injector needle & securing the handle with the provided section of rubber hose [1/16”]. “
Hope it does,
Paul.June 26, 2012 at 3:32 am #51970Hi Paul, some sense yes, ta
Regards
PeterJune 26, 2012 at 9:35 am #51971Hi Peter,
I don’t have a copy of the instruction sheet but I think Bergeon has some pdfs on their site. Give me a few minutes and I’ll find the page for you.
BobJune 26, 2012 at 9:47 am #51972There’s a link below to some pdfs that cover the 1a.
Also I just sent them a quick email to see if they have the instruction sheet in pdf or doc format. Will let you know when or if I hear back from them.
Bergeon Oiler Link: https://shop.bergeon.ch/index.php?cde=16&sent=1&categ1=OILER&categ2=OILER+AUTOMATIC&langue=2&planche=&detail=0&sadv=0&nbart=&new=0
Hope this helps for now Peter,
Enjoy
BobJune 26, 2012 at 6:39 pm #51973Thanks Bob. I have managed to get a copy from another source.
Let me know if it’s appropriate to post here – although it is 2.2Mb
Regards
Peter
June 26, 2012 at 6:57 pm #51974Hi Peter,
Good to hear you got one. Haven’t heard back from them yet but may have been late over there when I sent it.
Would be good to have that file if you could upload it.
I had a 2mb limit but just went in and changed it to 3mb. Should work as long as the server doesn’t enforce the standard 2mb upload limit.
Anyway if you could try would appreciate it.
Thanks!!
BobJune 27, 2012 at 3:42 am #51975OK, here we go…
Regards
Peter
June 27, 2012 at 7:16 pm #51976Thanks for uploading that Peter!
Bob -
AuthorPosts
- You must be logged in to reply to this topic.