Bench Day

Home › Forums › General Discussion Forum › Bench Day

  • This topic is empty.
Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • January 14, 2015 at 8:13 am #49408
    chris mabbott
    Participant

      Today was bench day :D

      I’ve already tried it for vibration dampening and it’s a lot better, I mean that the vibration doesn’t travel above so much, it has been reduced at least 50% Still sounds the same when you’re next to it though..

      Now I have to apply some oil to the wood and make some draw liners etc etc..

      January 14, 2015 at 10:28 am #61338
      randy
      Participant

        It looks great Chris !

        January 14, 2015 at 12:22 pm #61339
        namonllor1953
        Participant

          Whooaaahhh!! 😮
          How sweet is this? 8-) I speak fluent milling machine and yours said well, I can’t repeat it here as the list is “G” rated. Let’s just say it’s jealous!!
          Great job Chris…

          January 14, 2015 at 1:22 pm #61340
          stevefitzwater
          Participant

            Nicely done, has the better half weighed in on the results?

            January 14, 2015 at 2:05 pm #61341
            bernie weishapl
            Participant

              Sweet Chris. That is one nice bench.

              January 14, 2015 at 5:20 pm #61342
              willofiam
              Moderator

                Hey Chris, bench day is a GOOD day..is it pine or hickory?.. , cant wait to see it with the oil on it. hope all is well, dont stay up too late….William

                January 14, 2015 at 5:34 pm #61343
                Bob Tascione
                Moderator

                  Beautiful bench and setup Chris!
                  Bob

                  January 14, 2015 at 8:13 pm #61344
                  demewill
                  Participant

                    Nicely done!
                    I really like the wedged mortice construction. These hold well and can allow for knockdown construction.
                    Dan

                    January 15, 2015 at 1:24 am #61345
                    gerene
                    Participant

                      Beautifull !!!

                      Jan

                      January 16, 2015 at 2:01 pm #61346
                      chris mabbott
                      Participant

                        Thank you for your kind comments my brothers in time :D

                        I must report with satisfaction that I have received the nod of….. Better, from the boss, so for now, all is copacetic 😆

                        I’ve applied 3 coats of clear oil/protector, but it doesn’t really show, anyway, just gotta wait for the stink to dissipate then i’ll go and fill er up.. OILING TUNE

                      • Author
                        Posts
                      Viewing 10 posts - 1 through 10 (of 10 total)
                      • You must be logged in to reply to this topic.