Home › Forums › General Discussion Forum › Sessions escapements › Reply To: Sessions escapements
July 7, 2013 at 4:57 pm
#53689
Hey steve60, were you able to get the hairspring untangled??? be very careful, there should only be one piece of the hairspring thru the slot then pinned to the small brass piece on the plate as your photos show , also look on u tube for pin pallet escapement, that may help, yes, I believe the “fork” should be on either side of that pin and I am guessing another guide pin from the fork will ride “along” the notched out brass piece, the 2 pallet pins will be next to the escape wheel, hope that all makes sense. William