Reply To: Carbide graver sharpening…

Home Forums General Discussion Forum Carbide graver sharpening… Reply To: Carbide graver sharpening…

#57847
chris mabbott
Participant
  • Topics Started: 119
  • Total Posts: 1525

Tom,

It depends, if you’re using blanks and forming the cutting end from scratch, I would say your first step is to remove the large quantity of material first, possibly using the 180-400. You can finish sharpen with a fine stone after the tip has been formed with 800 up.

David will know better as he uses the diamond stones so I could be in error, I’ll be curious to find out..

chris mabbottReply To: Carbide graver sharpening…