Reply To: incabloc setting

Home Forums General Discussion Forum incabloc setting Reply To: incabloc setting

#57498
tmac1956
Participant
  • Topics Started: 171
  • Total Posts: 1259

Jan:

Clearly, I’ve never done one of those so that explains why I didn’t know the difference between removing the springs and the whole assembly – typical. ;) Anyway, last week I was looking at my staking set and found the two punches, but I don’t see any numbers on the stumps. Do your stumps have numbers on them and if so, where are they to be found?

Another question… if those assemblies are pushed out could one use the micrometer on the staking set to measure the depth before pushing it out? Of course that would imply that the end shake was correct to start with – I guess there’s no garuntee on that.

Thanks for the info on the spring tools – I guess I need a set of those as well. One other thing… if you don’t have those punches and stumps, you can find these on eBay here.

http://www.ebay.com/itm/VINTAGE-K-D-INCABLOC-PUNCHES-STUMPS-No-329-WATCHMAKER-JEWELER-QUALITY-MADE-/351058818751?pt=LH_DefaultDomain_0&hash=item51bcbc76bf

…and here

http://www.ebay.com/itm/K-D-KENDRICK-DAVIS-MODEL-329-INCABLOC-PUNCHES-STUMPS-EXCELLENT-CONDITION-/171315123762?pt=LH_DefaultDomain_0&hash=item27e32d5632

Thanks!
Tom