Reply To: Graham escapement

Home Forums General Discussion Forum Graham escapement Reply To: Graham escapement

#55097
mahlon
Participant
  • Topics Started: 28
  • Total Posts: 215

Jan, what I usually do with the worn holes, is to, use a small dowel and a little wood glue If you if you use a pencil sharpener to make a sharp point, it will fill the holes perfectly. Once it has dried it will drill nicely . It is funny that you mentioned it setting in the case, out of level. The one that I was working on was the same way. The mount was 1/8″ lower on one side. I could not lower the other side, because the dial would set to low, so I shimmed the low side and stained the shim to match the rest of the mount. ;) Mahlon

mahlonReply To: Graham escapement