Reply To: Cutting Graver Material

Home Forums General Discussion Forum Cutting Graver Material Reply To: Cutting Graver Material

#54623
willofiam
Moderator
  • Topics Started: 75
  • Total Posts: 1437

Hey Jonathan, to start we may be better off referring to Bobs videos on learning to turn, check that out and let us know if you have anymore questions, also if you have not had much experience on the watchmakers lathe get some brass stock from the hardware store and practice with that first, it will be easier to cut and experiment with but by all means have fun ;) ..,. William

willofiamReply To: Cutting Graver Material