Reply To: replacing roller jewel

Home Forums General Discussion Forum replacing roller jewel Reply To: replacing roller jewel

Bob Tascione
  • Topics Started: 38
  • Total Posts: 1553

Hi Scott,
Good talking with you today!
I think if you drop down .002mm to .5 you should be ok. If that’s still a bit tight then you can try the next size down. The catching that you mentioned in our phone conversation can occur from a banking pin being adjusted too far in. This can prevent the pallet from moving over far enough for the roller jewel to clear the horn. Please let me know what you find out.

Good Luck,

Bob TascioneReply To: replacing roller jewel