Reply To: Waltham rattle…

[Bob Tascione]

Hey don’t worry about. I’m the worst when it comes to terminology. I’m constantly forgetting the proper names to use.

Ok if it’s a single roller then that’s good. I think you’re on the right track. Would first do what you plan to do by checking that the roller is seated properly. If everything is fine and shake looks good ie: pivot extends to proper depth in foot jewel and jewels are correct then would suspect that the roller jewel is extending too far down. May be set too low or may be that the jewel was replaced with a longer one. This isn’t too uncommon.

Please let us know what you find Tom,

Bob