Home › Forums › General Discussion Forum › HF Mini Mill/Drill… › Reply To: HF Mini Mill/Drill…
David:
I think I found some of the parts you mentioned. The Enco 8 1/2 N .040-.250 Ball Bearing chuck and 3/16 and 3/8 end mill holders aren’t comming up as a search result.
Here’s what I’ve found.
Collet Sets; Type: R8; Inside Diameter Range (Inch): 1/8 – 3/4; Number of Pieces: 11
http://www.use-enco.com/CGI/INSRIT?PARTPG=INLMKD&PMPXNO=3905715&PMAKA=891-6076
Clamping Sets; Type: Step Block and Clamp Set; Number of Pieces:
http://www.use-enco.com/CGI/INSRIT?PARTPG=INLMKD&PMPXNO=951285&PMAKA=400-2501
Drill Chuck Parts; Style: Jaw & Nut Unit
http://www.use-enco.com/CGI/INSRIT?PMAKA=319-2812&PMPXNO=19506222&PARTPG=INLMK32
3/8 end mill holder
http://www.use-enco.com/CGI/INSRIT?PARTPG=INSRAR2&PMAKA=368-7022&PMPXNO=21379465
I know the first two are probably wrong.
Thanks!
Tom