Reply To: Lathe collets…

Home Forums General Discussion Forum Lathe collets… Reply To: Lathe collets…

#52745
david pierce
Participant
  • Topics Started: 90
  • Total Posts: 1360

Tmac,
The LEVIN lathe uses the same 8mm collets that the headstock uses. This is one of the features that make the lathe so nice. If your lathe does not have a cross slide and you want to add one, any cross slide (Levin, Wolf Jahn, Derbyshire, etc.) made for these machines will work just fine. Another tool you may want to add later is a face plate. The LEVIN face plate is just a round plate with a bunch of threaded holes drilled into it attached to an 8mm adapter. This you can make yourself.
RG tools is a store that sells through Ebay. They do not make anything themselvs. I am pretty sure that the four jaw chuck I bought from them was made in China. The name on the chuck box is HBM; whoever they are. If you search through all of the watch lathe pages on Ebay you will find RG tools. They are located in England.
david

david pierceReply To: Lathe collets…