Home › Forums › General Discussion Forum › Main Spring Barrel Teeth Repair › Reply To: Main Spring Barrel Teeth Repair
October 25, 2012 at 12:57 pm
#52312
I am glad you got the clock running but I would sure be careful after bending the teeth, that can put a lot of stress on the brass and if it should strip those teeth there is no telling what other damage that might cause.
If it looks like this then you do have a Keinzle.
Jakob KIENZLE (1859 – 1935) was the founder of a major German clock producing factory in the town of Schwenningen, Württemberg.
Keinzle clocks are fairly common, at least this side of the pond so you shouldnt have too much trouble tracking down a movement. If you post a picture of the back and front I might even be able to track one down for you.